Thursday, November 7, 2013

Altered Art: Snowman Bottles & Jars

I have this thing about bottles and jars. 
A BIG thing

All kinds. New ones, old ones, big ones, small ones, clean ones, dirty ones...They ALL get me excited!! 

Whether it's to make jams & jellies (pomegranate jelly is my favorite) or to create a delightful piece of jewelry using a teensy-weensy jar with wondrous minuscule contents or to make a fabulous "faux" Snow-globe creation using the big 'uns with fun miniature scenes inside...they all float my boat BIG TIME! 




I've been planning these snowmen for months. 
YEARS, actually. I finally started them last December but couldn't finish in time for the holidays so they sat patiently waiting for me. 

Sorry, Frosty! :/

So here is my crafting table of "Snowman-ia"  




I guess this certifies me as an official "Snowmaniac"?!! 
(My hubby is convinced!)







The teeny jars are from Tim Holtz scrapbooking supplies, that were purchased from my local Joann Crafts store. I sculpted tiny polymer clay heads to suit each jar size, using white (oven-bake Fimo polymer clay) for the heads and orange clay rolled into tapered cone shapes for tiny "carrot" noses. Then I made black clay specks or tiny "balls" for the "Coal" eyes and mouth. You could also use tiny rhinestones or glass beads to simplify the process.


They were baked as directed on the package (though I tend to lower the oven temperature when I bake my minis so they don't get burnt, or "tent" the items with foil to protect them). It isn't a bad idea to paint a coat of Mod Podge or Polymer Clay Matte Finish Glaze over the head to add extra security to the facial features. I suggest this because I have a faceless snowman head to show for my woe!





The tiny jars were filled with luminescent glass bugle beads and iridescent seed beads for simulating sparkling "snow", then the heads were glued in place on top to seal the jar. I use Aleene's tacky craft glue with great success. E6000 glue would also be a great choice. (The tallest tiny jar is actually a mini Tabasco bottle I've been saving for 10 years for just the right project!)


Before I finished embellishing the snowmen heads, I wire-wrapped 18 gauge wire around the bottles glass neck several times to secure it, then I formed a loop at the back, so it can be worn as a pendant or hung as an ornament. I made reeeeally long noses that probably won't survive being worn very long, so next time I'll be making "stunted" carrot noses! Lol







Once I had the wire securely in place (you can put a dab of glue for extra security), I finished the embellishments on the heads. Colorful metallic threads, yarns, and trim make great neck scarfs! For cute hats you can roll tiny "cones of wrapping paper to form pointed "party" hats in holiday designs, or use various mini silk or paper flower embellishments, mini hat charms, etc. 

Use your imagination and go wild!

To add a touch of glitzy "snow" Liquitex Matte Gel Medium (found in the fine art painting aisle at the craft store), and paint all over or just random blotches on your snowman's head, hat, neck and scarf, then immediately while still wet, sprinkle sparkling white or translucent iridescent glitter over it for the appearance of "snow".


There is no end to the possibilities...



And now, on to the Big a Boys!!!












As I mentioned in a previous post, I've become a hoarder of glass jars and bottles. My conscience for recycling coupled with my crafting obsession has created a monster! My box of jars has grown so much that it is overtaking my craft closet...I must do something about that...it is completely unacceptable...please remind me when it's time for Spring cleaning...Yes, I do believe I must hold a jar crafting "sit in"!!

Anywhoo....

On to my big Snowmen...


These particular Snow Boys utilize the bottles I have recycled, such as barbecue sauce bottles, vinegars, etc. They have long narrow necks which aren't suitable for embellishments within, but look fantastic when filled with Pearls, Crystals, Beads and Glitter. 

The outer trimming and embellishments make these Paperclay Snowmen special in a more a Artsy-Fartsy Shabby Chic kinda way. I la la la LOVE these guys!!

The bottles were first thoroughly washed and dried, removing all residual food odors...(who needs a snowman that smells like vinegar, right?!!) 

The heads were sculpted (loose exaggeration!!) by rolling Paperclay into balls that were proportional to the size of the bottle it is to belong to. Paperclay is a product sold near the polymer clay in craft stores. It is very smooth and creamy white, and air dries. It is smoother than Celluclay papier-mâché (which is what I prefer to use for my bigger Mason Jar Snowmen). 

I didn't use a styrofoam ball center because these particular heads are only about 2-inches in diameter, and though it took several days to dry completely, they didn't crack too much, which I had been worried about.

For the noses, I sculpted "carrots" from Fimo (orange) oven-bake clay, then baked them and glued them to the heads using Aleene's Tacky Craft Glue. You could also sculpt a "carrot" or "nose bump" from Paperclay and then paint it orange. 

For the eyes and mouth I used those paper fasteners by Tim Holtz (used in scrapbooking to attach multiple papers together) and I just stuck the ends into the clay while it was still soft. Then I let the heads dry completely.

After filling the bottles to the desired fullness with various size faux pearl "snowballs", iridescent beads, and snowy-ish baubles, I glued the head in place, making sure not to let the glue run down the inside of the bottle neck.

Now comes the fun!

To accessorize the snowmen, I first made (or found) a hat...every self-respecting snowman needs a hat, right?!! There are endless ideas for hats. I use everything from cake decorating tips (which are perfectly cone shaped, shiny silver, and even have a hole in top for adding extra embellishments), to kitchen gadgets or broken toys, holiday wrapping decorations, etc.

 Another great idea for hats is to use the clipped finger ends of old worn out knitted gloves, to use them as "knitted caps". Just roll up the bottom edge like a cuff and voila you have a knit cap!


...And every snowman needs a scarf, don't forget that!! 


You can crochet or knit one, (if you're feeling über-inspired!) or you can tie strips of fabric, trim, lace, etc., around the bottle neck, to give your snowman that cozy feel. I like to use the "eyelash" yarns to give them a frilly look, and extra neck wrappings of metallic pipe cleaners for a festive appearance and fun swirly curly wired curlicues for interesting shape. 


Once you have all the trimmings in place, it's time to "Let it Snow".
Using Liquitex Matte Gel Medium, dab splotches in various places that you want the sparkly "snow" to stick, then sprinkle liberally with iridescent clear glitter "snow". 

Allow to dry completely for several days to insure a solid structure.


For my "Snowman Dream" Jars, (using large Mason jars), I have created a faux snow globe effect (without the liquid). Using mini holiday decorations, I create scenes within the large Mason jar. Glittered animals, tiny snow babies, sparkling trees, wrapped gifts, it all looks amazing inside of a snowman's tummy! Once you start, you can't stop!! At least, I can't stop!!

Once the little scene is in place (glued securely with E6000 or Tacky glue) I glue a layer of additional glitter or sparkly beads to cover the bottom of the jar evenly.

For the Snowman heads on the big Mason jars, I use Celluclay (paper mâché base powdery substance that mixes with water to form a moldable air-drying clay) to cover styrofoam balls in the appropriate size to fit the jar. For quart size jars I used a 3-inch styrofoam ball then covered it with approx. 1/2-inch of papier-mâché over it. The styrofoam ball helps with quicker drying time,  and assists in preventing cracks when drying.

The Celluclay papier-mâché leaves a rough textured surface (compared to Paperclay which is smooth), and I really like the texture for the big snowmen. 

For the nose, I add a small raised "bump", which I paint orange for his "carrot" nose, once the head is completely dry. For eyes on these guys, I like to use black 10mm rhinestones (plastic ones that come in asst. sizes), and for the mouth I use 4mm black rhinestones placed to create a happy smile.

Once the paper mâché is totally dry, glue it securely to the jar opening. If there are gaps, they can be disguised with "scarf" placement. I embellished my chilly pals with random unexpected charms and accessories. A broom made from a cinnamon sticks and twigs inspires endless possibilities!




To personalize my Snowmen I made beaded namesake charms using alphabet beads and crystals to trim. Trim, lace, ribbon, and charming embellishments add whimsy and style.

Snow accents are created as for the previous snow folks, with glitter over Liquitex Matte Gel Medium, finishing off the paper mâché Snowmen (& Snowomen, too, of course!) with fanciful twinkling wonderment to delight one and all!!


I hope you have as much fun making these Snowman Jars as I did!

With Sugarplum Hugs,

Deenie

PS. Be sure to comment below and let me know how your snowman jar crafting is going for you!















8 comments:

  1. These are terrific, what great things you can do to personalize them. Thanks D, I'm gonna be digging out jars for next year

    ReplyDelete
    Replies
    1. Save em all, Dodi...it's addicting!!!!! ;)

      Delete
  2. These are beautiful! Thanks!

    ReplyDelete
    Replies
    1. Thank you! I hope you enjoy trying your hand at making some snow folk holiday magic!

      Delete
  3. It's nice to see someone else ith the kind of snowman mania that I share. Love your tiny men!

    ReplyDelete
    Replies
    1. It truly is an addiction!! Happy to spread the mania!! The little ones are my favs!!! They're mini Tabasco bottles!!

      Delete